Hubei EverFLON Polymer Co.,Ltd

Industrial PTFE Raw Material , PTFE Powder Moulding Processing For Gasket

Product Details:
Place of Origin: China
Brand Name: Everflon
Certification: ISO;RoHS;Reach;SGS
Model Number: M120
Payment & Shipping Terms:
Minimum Order Quantity: 1000 kg
Packaging Details: 25kg in Plastic Bag and Packed in Drum
  • Detail Information
  • Product Description

Detail Information

Size: 90-120um Appreance: White Powder
Processing: Moulding Package: 25kg In Drum
Materials: 100% Virgin PTFE Application: Lining, Tubing, Gasket
High Light:

ptfe molding powder

,

ptfe teflon powder

Product Description

PTFE Resin / PTFE Suspension Powder / 90-120um size / Moulding Processing


 


Main Application of Everflon PTFE M40


1. Pad.

Industrial PTFE Raw Material , PTFE Powder Moulding Processing For Gasket 0

2. Rod

Industrial PTFE Raw Material , PTFE Powder Moulding Processing For Gasket 1

3. Sheet

Industrial PTFE Raw Material , PTFE Powder Moulding Processing For Gasket 2

 

 

 


Main Processing Way of Everflon PTFE M40


 

Everflon® PTFE M usually is processed in two steps: preforming and sintering:


The powder is first compacted into a preformed shape approximating that of the desired molding. A precise
heating (sintering) and cooling cycle is then used to consolidate the molding at temperatures above the crystalline melting point of the neat powder.
The properties of a finished molding are dependent on perform pressure, sintering time and temperature, and cooling rate.


The details please visit www.everflon.com.

 

 

 


Properties of Everflon PTFE Resins


Everflon® PTFE Suspension Powder is preferred for moldings requiring optimum mechanical and electrical properties. Its low bulk density limits the size of moldings from a given mold or press opening. It is often preferred for making filled compounds, especially with metal powders that are difficult to mix because of density differences.

 

 


Data List of Everflon PTFE M120


 

ITEM UNIT ASTM M120
Average Partical Size um D2116 90-120
Apparent Density g/L D638 450
Melting Point °C D638 325
Tensile Strength MPa D4591 >30
Elongation %   >330
Specific Gravity g/cm3   2.16
Water Content %   <0.04

 

 

 

 


Package&Delivery


Everflon® PTFE Suspension Powders’ preforming is easiest when the resin is uniformly between 21–27 °C (70–80 °F). As temperatures decline below this range, the resin will be increasingly difficult to mold without cracks and problems with condensed moisture. Higher temperatures inhibit flow and promote lumping.

Storage conditions should be set accordingly. Cleanliness is a critical requirement for successful use of Everflon
® PTFE Suspension Powder. The white resin and high sintering temperatures cause even small foreign particles to become visible in finished moldings. Keep resin drums closed and clean. Good housekeeping and careful handling are essential.

Industrial PTFE Raw Material , PTFE Powder Moulding Processing For Gasket 3

Get in touch with us

Enter Your Message

You Might Be Into These