Home ProductsPTFE Resin

PTFE Resin / PTFE Suspension Powder / 20-40um size / Moulding Processing

PTFE Resin / PTFE Suspension Powder / 20-40um size / Moulding Processing

PTFE Resin / PTFE Suspension Powder / 20-40um size / Moulding Processing

Product Details:

Place of Origin: China
Brand Name: Everflon
Certification: ISO;RoHS;Reach;SGS
Model Number: M40

Payment & Shipping Terms:

Minimum Order Quantity: 1000 kg
Packaging Details: 25kg in Plastic Bag and Packed in Drum
Contact Now
Detailed Product Description
Size: 20-40um Appreance: White Powder
Procesiing: Moulding Package: 25kg In Drum
Materials: 100% Virgin PTFE Application: Lining, Tubing, Gasket

PTFE Resin / PTFE Suspension Powder / 20-40um size / Moulding Processing


 


Brief Introduction


Everflon®  PTFE Suspension Powder M series is a white powder with a small particle size. The small particle size of Everflon® PTFE M40&90 helps to minimize voids, even at relatively low molding pressures. Its most unique feature is the irregular, fibrous character of the particles. The fibrous particles promote good capture and uniform distribution of inorganic fillers when they are added to modify the mechanical properties of moldings. It offers an excellent combination of properties that are characteristic of Everflon® fluoroplastic resins.

 

 


Properties of Everflon PTFE Resins


Everflon® PTFE Suspension Powder is preferred for moldings requiring optimum mechanical and electrical properties. Its low bulk density limits the size of moldings from a given mold or press opening. It is often preferred for making filled compounds, especially with metal powders that are difficult to mix because of density differences.

 


Data List of Everflon PTFE M40


 

ITEM UNIT ASTM M40
Average Partical Size um D2116 20-30
Apparent Density g/L D638 450
Melting Point °C  D638 325
Tensile Strength MPa D4591 >30
Elongation %   >330
Specific Gravity g/cm3   2.16
Water Content %   <0.04

 

 


Main Processing Way of Everflon PTFE M40


 

Everflon® PTFE M usually is processed in two steps: preforming and sintering:


The powder is first compacted into a preformed shape approximating that of the desired molding. A precise
heating (sintering) and cooling cycle is then used to consolidate the molding at temperatures above the crystalline melting point of the neat powder.
The properties of a finished molding are dependent on perform pressure, sintering time and temperature, and cooling rate.


The details please visit www.everflon.com.

 

 


Main Application of Everflon PTFE M40


1. Pad.

PTFE Resin / PTFE Suspension Powder / 20-40um size / Moulding Processing

2. Rod

PTFE Resin / PTFE Suspension Powder / 20-40um size / Moulding Processing

3. Sheet

PTFE Resin / PTFE Suspension Powder / 20-40um size / Moulding Processing

 


Package&Delivery


Everflon® PTFE Suspension Powders’ preforming is easiest when the resin is uniformly between 21–27 °C (70–80 °F). As temperatures decline below this range, the resin will be increasingly difficult to mold without cracks and problems with condensed moisture. Higher temperatures inhibit flow and promote lumping.

Storage conditions should be set accordingly. Cleanliness is a critical requirement for successful use of Everflon
® PTFE Suspension Powder. The white resin and high sintering temperatures cause even small foreign particles to become visible in finished moldings. Keep resin drums closed and clean. Good housekeeping and careful handling are essential.

PTFE Resin / PTFE Suspension Powder / 20-40um size / Moulding Processing

Contact Details
Hubei EverFLON Polymer Co.,Ltd

Contact Person: Chen

Send your inquiry directly to us (0 / 3000)

Other Products