|Reduction Rate:||1:800||Appreance:||White Powder|
|Procesiing:||Paste Extrusion||Package:||2okg In Drum|
|Materials:||100% Virgin PTFE||Application:||Big Size Tube|
ptfe teflon powder,
pure ptfe powder
PTFE Fine Powder / Middle Reduction Rate / Paste Extrusion Processing / Tubing
Everflon® PTFE Fine Powder is soft, white polymers that are produced from PTFE aqueous dispersions.
These fine powders possess the lowest coefficient of friction, the highest heat resistance, chemical resistance, electrical properties, and non-sticking properties of all fluoropolymers. It is uniquely capable of being sheared by lubricated paste extrusion into a coherent fibrous matrix with useful structural integrity.
Data List of Everflon PTFE Fine Powder F500
|Average Partical Size||um||D4895||480|
|Standard Speicific Gravity||D4895||2.15|
|Exrusion Pressure a RR 400:1||MPa||D4895||23|
|Thermal Instability Index||D4895||<7|
Main Processing Way of Everflon PTFE F500
Everflon®PTFE F500 is designed for processing at medium to high reduction ratios of 100:1 to 600:1. It is particularly suitable for production of high quality tubing, spaghetti tubing, and wire coating.
This grade is also highly suitable for after-processing technologies, such as flanging, welding, blow molding, and convoluting.
Prcessing Guide of Everflon PTFE Fine Powder F500
Everflon® PTFE F500 is extruded using a liquid processing aid, such as naphtha. In the paste extrusion process.
The powder is mixed with a lubricant aid and then compressed into a cylindrical preform slug under light pressure(1.5–2.0 MPa [220–290 psi]).
The preform slug is placed in the cylinder of a paste extruder, where the composition is forced under high pressure through a finishing die to produce beading, tubing, or wire coatings.
After extrusion, the product is a low-density, but coherent, fibrous structure. Everflon® PTFE F500 is usually
processed further, with heat, into a solid resin product, such as tubing. Heat is applied in two steps, which maybe taken in-line with extrusion or separately.
Main Application of Everflon PTFE Fine Powder F500
2. Cable Insulation
Everflon® PTFE F-500 must be handled carefully to avoid shearing the powder prior to extrusion. Fibrillation by shearing is not reversible, and damaged particles can appear as defects in the finished product. As temperature is reduced below the transition point of 19 °C (66 °F), the powder becomes progressively less sensitive to mechanical damage or compaction in its containers.
Everflon®PTFE Fine Powder is are packaged in 20kg. (44lb ),PE bag, Hard paper drums