Hubei EverFLON Polymer Co.,Ltd

Polytetrafluoroethylene Liquid PTFE Products Milky White Aqueous For Li - Ion Battery

Product Details:
Place of Origin: China
Brand Name: Everflon
Certification: SGS,RoHS.ISO
Model Number: D60P
Payment & Shipping Terms:
Minimum Order Quantity: 1000kg
Packaging Details: 25kg in Drum ; 1250kg in IBC Drum
Supply Ability: 50T per Year
  • Detail Information
  • Product Description

Detail Information

Materials: PTFE Content: 60%
PH: 9 PFOA: No Content
Package: 25kg Drum Or IBC Application: General Application For Coating
High Light:

ptfe aqueous dispersion


ptfe emulsion

Product Description

PTFE Dispersion / 60% Solid Content / Aqueous Liquid / No PFOA / Anti-Droping


Brief Introduction

Everflon® PTFE Dispersion D60 is a milky white aqueous with non ionic surfactant. It provides inertness to nearly all industrial chemicals and solvents;stability at high temperatures;excellent dielectric properties;lowest coefficient of friction of any solid materials; excellent weatherability and no-stick characteristics, using temperature is between -240°C (-400F) to 260°C (500F).


PTFE Dispersion for anti-sticky coating and fiber impregnation industry application. It could be used as substitution for DuPont and Dyneon PTFE dispersion.


Data List of Everflon PTFE Dispersion D60F


Solid Content % PTFE by Weight D12086 60
Density of Dispersion g/cm3 D12086 1.5
surfactant Content % D4895 4-6
Dispersion Partical Size um    0.3
pH   E70 9
Brookfield Viscosity Mpa.s D2196 20-30



Main Processing Way of Everflon PTFE Dispersion D60


Conventional dip or flow techniques can be used for coating or impregnating high temperature fabrics, fibers, and other products with Everflon® PTFE D60. A continuous PTFE resin coating on woven fabrics made of fiberglass, or other high temperature-resistant fibers can be made by dip coating. Multiple passes may be used to build the desired thickness to produce a smooth, crack-free coating.

Everflon® PTFE D60 is formulated to provide good rewetting on each pass. Each coating layer is usually dried to remove water (typically at 120 °C [250 °F]), baked to remove the wetting agent (typically at 270 °C [518 °F]), sometimes calendered, and finally heated above the crystalline melting point of the resin particles(approximately 337 °C [639 °F]).

The details please visit



Main Application of EverflonPTFE Dispersion D60P

1. Anti-drip

Polytetrafluoroethylene Liquid PTFE Products Milky White Aqueous For Li - Ion Battery 0




Everflon®  PTFE D60 must be properly stored to maximize the stability of the dispersion. The PTFE particles will settle on prolonged standing and/or on prolonged heating— temperatures above 40°C (104 °F) should be avoided.

The dispersion must be protected from freezing, which will cause irreversible settling.


The optimum storage temperature range is 7–24 °C (45–75 °F). If dispersions are to be stored for extended periods, lower-temperature storage is desirable.

For optimal performance, Everflon® PTFE D60 should be gently mixed or rolled monthly and prior to use.

Storage and handling areas should be clean.Keep dispersiondrums closed and clean to avoid both contamination and coagulation by drying at the liquid surface. High processing temperatures will cause even very small foreign particles to become visible and/or to make defects in finished products.


Good housekeeping and careful handling are essential.

Polytetrafluoroethylene Liquid PTFE Products Milky White Aqueous For Li - Ion Battery 1

Get in touch with us

Enter Your Message

You Might Be Into These